Code: 15A01CB

2 (different) sections of "dragon's teeth" (German: Drachenzähne) anti-tank fortification, each 50mm wide by 100mm deep (2"x 3.9"). These are designed to be compatible with Flames of War rules: use two of them in a line to make a standard fortification section of 200x50mm, or one in front of the other to make an historically correct and accurately scaled 1/100 ("15mm" wargame scale") model.
These multiple lines of square-pyramidal reinforced concrete obstacles were designed to impede the movement of tanks and mechanised infantry, they were employed extensively in WWII, particularly on the Siegfried Line, of which our model is a faithful reproduction.
Supplied unpainted.

Click here for shipping charges

---

Plain cast: EURO€ 7.85
Quantity:

---

Code: 15A50CB

15mm Normandy beach obstacles (24 pieces) set, include 4 log ramps, 6 pole with anti-tank tellermine on top, 4 "nutcracker" boat traps, 4 "pyramid" anti-tank steel obstacles, 4 "tetrahedron"anti-tank concrete obstacle and two sticks with 7 tellermine each to make your obstacles even more effective!
These are designed to be compatible with Flames of War rules while also remaining historically correct and accurately scaled 1/100 ("15mm" wargame scale") model.
All these obstacles were deployed in multiple lines designed to impede access to landing crafts and the movement of tanks and mechanised infantry on the beaches of Normandy prior to allied invasion.
Supplied unpainted.

Click here for shipping charges

---

Plain cast: EURO€ 7.85
Quantity:

---

Code: 15A51CB

15mm Belgian gates (4 modular C-elements) used as Normandy beach obstacles.
These are designed to be compatible with Flames of War rules while also remaining historically correct and accurately scaled 1/100 ("15mm" wargame scale) model.
The Cointet-elements, also known as a Belgian Gates or C-elements, were designed to be connected to each other and formed the main anti-tank barricade of the Belgian K-W Line, built in 1940 against a possible German armoured invasion. After the German victory the captured Belgian Gates were reallocated across Europe to serve as barricade elements on roads, bridges and beaches. 23,408 of these "C-elements", as the Germans call them, were brought to Normandy and used as beach obstacles.
Supplied unpainted.

Click here for shipping charges

---

Plain cast: EURO€ 7.85
Quantity:

---

Code: 15A52CB

15mm Czech hedgehogs (20 pieces) that can be used as Normandy beach obstacles.
These are designed to be compatible with Flames of War rules while also remaining historically correct and accurately scaled 1/100 ("15mm" wargame scale") model.
These static anti-tank obstacle defense get their name because they were originally designed and used on the German border by the Czechoslovak army. Effective and cheap to make they were widely adopted as anti-tank defense during World War II and deployed in mass also by the Soviet Union.
Supplied unpainted.

Click here for shipping charges

---

Plain cast: EURO€ 7.85
Quantity:

Code: 15A04CB

15mm Objective Vf58c Tobruk bunker emplacement (with optional tank turrets FT17 + R35 APX).
This code includes a Vf "Tobruk" bunker based on a Fow-size large base 50mm wide by 65mm deep (2"x 2^1/2") + one 32mm wide by 25mm deep (1^1/4"x 1"). Next to the entrance there is a covered space exactly sized for a small team base. Perfect as an objective or to be added to a larger terrain piece, board or table. Also included are two early war French tank turrets (a Renault FT17 with the 8 mm Hotchkiss machine gun and a R35 APX with the Puteaux SA 18 - 37mm gun) that were commonly used by the germans on such static fortifications, especially along the Atlantic Wall.
The tobruk bunker can be fitted with any of the turrets or with a standard infantry MG (not provided). The VF (Verstärkt Feldmäßig) was a series of light bunkers with walls between one and two meters thick and no airtight seal or ventilation. This model is a very accurate scale reproduction and has plenty of beautifully sculpted surface detail to help you in painting.
Like all other models in this range it is made of tough POLYURETHANE.
Require assembly. Supplied unpainted.

Click here for shipping charges

---

Plain cast: EURO€ 7.85
Quantity:

---

On to Scenic Bases!

• On to bunkers!
• Back to the CAMA range front page
• Back to Home page

Code: 15A16CB

15mm Vf58c Tobruk bunkers x 3 (with optional tank turrets FT17 + R35 APX).
This code includes 3 tobruk bunkers (one completely out of the ground, one half buried and one completely buried on a Fow-size medium base) that will give you the freedom to field them as you prefer or even include them in a larger terrain piece, board or table. Also included are two early war French tank turrets (a Renault FT17 with the 8 mm Hotchkiss machine gun and a R35 APX with the Puteaux SA 18 - 37mm gun) that were commonly used by the germans on such static fortifications, especially along the Atlantic Wall.
Any of the tobruk bunkers can be fitted with any of the turrets or with a standard infantry MG (not provided). The VF (Verstärkt Feldmäßig) was a series of light bunkers with walls between one and two meters thick and no airtight seal or ventilation. This model is a very accurate scale reproduction and has plenty of beautifully sculpted surface detail to help you in painting.
Like all other models in this range it is made of tough POLYURETHANE. Overall size of the largest (base excluded) is 40x23mm and the height is 29mm (turret excluded).
Require assembly. Supplied unpainted.

Click here for shipping charges

---

Plain cast: EURO€ 7.85
Quantity:

---

On to Scenic Bases!

• On to bunkers!
• Back to the CAMA range front page
• Back to Home page

Code: 15A44CB

Vf67 Tobruk für Kampfwagenturm (with pzkpfw II & pzkpfw 38T turrets).
The Vf67 was a larger version of the Vf58 tobruk bunker (still fits on a Fow-size medium base anyway, just!) that was used for bigger tank turrets. There are two different ones to choose from included in this kit: the early war panzer II and one from the ČKD LT vz. 38, a Chzeck light tank adopted by Nazi Germany as Pz. 38(t) following annexation. Production ended in 1942, when its main armament was deemed inadequate. The chassis of the Pz. 38(t) continued to be produced for the Marder III until 1944, while the old turrets were commonly re-used on static fortifications.The VF (Verstärkt Feldmäßig) was a series of light bunkers with walls between one and two meters thick and no airtight seal or ventilation. This model is a very accurate scale reproduction and has plenty of beautifully sculpted surface detail to help you in painting.
Like all other models in this range it is made of tough POLYURETHANE; the roof is a separate piece which can be left loose to be removed and allow access to the interior, or glued in place. Overall size is 44x28mm and the height is 34mm to the top of the turret.
This bunker body comes in two parts with full interior plus a separate armored door, and can be fitted with either of the two turrets provided.
Require assembly. Supplied unpainted.

Click here for shipping charges

---

Plain cast: EURO€ 7.85
Quantity:

---

On to Scenic Bases!

• On to bunkers!
• Back to the CAMA range front page
• Back to Home page

Code: 15A45CB

Vf61a Tobruk ringstand for 5cm Festungsgranatwerfer.
The Vf61 was the smaller of the bunkers for mortars, it would fits on a Fow large size base and would make a great objective! It mounted the 5cm Festungsgranatwerfer 210f, which was the German name for the captured French 50 mm MLe35 fortress light mortar, built in the thousands and ubiquitous in the Maginot line.
This bunker body comes in two parts with full interior plus a separate armored door. The 5cm mortar and pillar stand is supplied as a highly detailed 3D resin print. The VF (Verstärkt Feldmäßig) was a series of light bunkers with walls between one and two meters thick and no airtight seal or ventilation. This model is a very accurate scale reproduction and has plenty of beautifully sculpted surface detail to help you in painting.
Like all other models in this range it is made of tough POLYURETHANE; the roof is a separate piece which can be left loose to be removed and allow access to the interior, or glued in place. Overall size is 44x40mm and the height is 26mm. Require assembly.
Supplied unpainted.

Click here for shipping charges

---

Plain cast: EURO€ 7.85
Quantity:

---

On to Scenic Bases!

• On to bunkers!
• Back to the CAMA range front page
• Back to Home page

Code: 15A47CB

Vf65a ringstand for 5cm Kwk 39 L/60 anti tank gun (included).
The VF (Verstärkt Feldmäßig) was a series of light bunkers with walls between one and two meters thick and no airtight seal or ventilation. The Vf65a was designed for the fearsome 5cm KwK 39 L/60 (5 cm Kampfwagenkanone 39 L/60) a 50 mm calibre anti tank gun, same as that used as the main armament of later models of the German Panzer III. The gun itself comes in only 3 easy to assemble parts and there is also a sprue of ammo boxes included, both full and empty, to add even more realism and detail to your model!

This bunker body comes in two parts printed in FDM, for a great concrete look just brush it over with PVA and dust with fine sand! The 5cm AT gun is supplied as a highly detailed 3D resin print in kit.

This model is a historically accurate scale reproduction.
Overall size is 50 x 50mm and the height (including the gun) is 22mm.
Require assembly. Supplied unpainted.

Click here for shipping charges

---

Plain cast: EURO€ 7.85
Quantity:

---

On to Scenic Bases!

• On to bunkers!
• Back to the CAMA range front page
• Back to Home page

Code: 15A48CB

R600 .
The R600 was designed for protection of the entire crew of the fearsome 5cm KwK 39 L/60 anti tank gun. It had two large underground rooms protected by 2 meters thick walls, one served as living quarters for the crew, the other was an ammo depot. The underground entrance was connected by two staircases on the back to the surface, where a reinforced concrete emplacement was built on the roof of the bunker. This model is specifically designed for table top gaming and as such it does not include the underground part of the building that would be invisible in normal circumstances. The gun itself comes in only 3 easy to assemble parts. The emplacement come in two parts and include the niches for the ammunition and there is a sprue of ammo boxes included, both full and empty, to add even more realism and detail to your model!

This bunker body comes in two parts printed in FDM, for a great concrete look just brush it over with PVA and dust with fine sand! The 5cm AT gun and ammo boxes are supplied as a highly detailed 3D resin print kit.

This model is a historically accurate scale reproduction.
Overall size is 100 x 75mm and the height (excluding the gun) is 15mm.
Require assembly. Supplied unpainted.

Click here for shipping charges

---

Plain cast: EURO€ 9.50
Quantity:

---

On to Scenic Bases!

• On to bunkers!
• Back to the CAMA range front page
• Back to Home page

Code: 15A23CB

Fire control position + command base (Objective marker).
One 50mm wide by 65mm deep (2"x 2^1/2") + one 32mm wide by 25mm deep (1^1/4"x 1").
Perfect for any desert or jungle setting as a game objective marker this model is cast in tough polyurethane resin and in the same size of a large FoW base. The roof is removable and there is just enough space inside to fit a medium FoW base. It has plenty of beautifully sculpted surface detail to help you in painting even on the underside of the removable roof! Comes complete with a small scenic base suitable for command units, snipers, observers, etc. selected at random from 10 different variations.
Supplied unpainted.

Click here for shipping charges

---

Plain cast: EURO€ 7.85
Quantity:

---

On to Scenic Bases!

• On to bunkers!
• Back to the CAMA range front page
• Back to Home page

Code: 15A25CB

Medium battery emplacement (desert)

These very detailed 15mm scale reproductions are perfect for your medium artillery batteries and are specifically designed so that the space inside each one is large enough to accomodate one Flames of War medium base either front-up or sideways, which means they are also perfect to emplace mortars and HMGs! This is a large pack that include everything you need to fortify a full section of medium artillery: three large sandbag emplacements for the gun bases, one medium dug-in marker, a medium scenic base for the staff and a small one for command, spotters, etc.
Designed for a North African setting these models are also perfect for the Pacific theatre and for Vietnam, just add plenty of jungle foliage and flocks!
Like all other models in this range these are made of tough POLYURETHANE.
Supplied unpainted.
Click here for shipping charges

---

Plain cast: EURO€ 14.90
Quantity:

---

On to Objectives and markers!

Code: 15A26CB

Large artillery battery emplacement (desert)

These larger emplacement are perfect for heavy artillery and are specifically designed so that the space inside is large enough to accommodate one Flames of War large base. This is a large pack that include everything you need to fortify a section of heavy artillery: two large sandbag emplacements for the gun bases, a medium scenic base for the staff, one small scenic base for command or spotters and one medium dug-in marker.
Designed for a North African setting these models are also perfect for the Pacific theatre and for Vietnam, just add plenty of jungle foliage and flocks!
Like all other models in this range these are made of tough POLYURETHANE.
Supplied unpainted.
Click here for shipping charges

---

Plain cast: EURO€ 14.90
Quantity:

---

On to Objectives and markers!

Code: 15A41CB

15mm Regelbau L410 emplacement for one 20mm or one 37mm anti-aircraft gun (German)

German defences were tipically organized in batteries which were protected from air raids by anti-aircraft (AA) guns. The L410 was the standard AA-battery command post and was mostly buried, except for the built-on emplacement for a 3.7 cm FLAK, which is what our model actually depicts. Accurately scaled for 15mm figures this model can hold a large base or alternatively two medium sized bases and it is the perfect choice for defending your batteries!
Like all other models in this range this bunker has plenty of beautifully sculpted surface detail to help you in painting and it is made of tough POLYURETHANE. Overall external size is approximately 112x100mm and the height is 18mm. As this type of bunker was sometimes attached to other fortifications the sides and sandbags are cast separately to leave you the maximum freedom of choice in setting it up in your layout!
Require assembly. Supplied unpainted.

Click here for shipping charges

---

Plain cast: EURO€ 14.90
Quantity:

---

On to Objectives and markers!

Code: 15A42CB

15mm VF6a Spotter Bunker (German)

This bunker, called a "Beobachtungsstand splittersicher" was designed as a protected observation post and has a wide opening which allows an excelllent field of view all around. It could be used as a spotter for artillery fire and makes a fantastic objective for a scenario game! The VF (Verstärkt Feldmäßig) was a series of light bunkers with walls between one and two meters thick and no airtight seal or ventilation. This model is a very accurate scale reproduction and has plenty of beautifully sculpted surface detail to help you in painting, including damage from enemy fire.
Like all other models in this range it is made of tough POLYURETHANE; the roof is a separate piece which can be left loose to be removed and allow access to the interior, or glued in place. Overall size is 75x55mm and the height is 38mm. There is not enough space inside to fit a Flames of War base.
Require assembly. Supplied unpainted.

Click here for shipping charges

---

Plain cast: EURO€ 7.85
Quantity:

---

On to Objectives and markers!

Code: 15A49CB

Regelbau 667 – Kleinschartenstand with 5cm Kwk 39 L/60 anti tank gun.
The Regelbau (German for "standard design") were a series of standardised bunker designs built with walls up to 3.5 meters thick and forced ventilation. The Bauform R667 casemate was one of the most common and effective type of bunker on the Normandy coast (present on Omaha Beach Wn.65 and Utah Beach), were would be positioned along the shore to permit enfilade fire along all the beach, with the massive side wall extension facing the sea and protecting the embrasure from naval gunfire. This type of fortification proved to be practically impervious to bombardment and had to be eliminate one by one by close combat assault. It was designed for the fearsome 5cm KwK (KampfWagenKanone) 39 L/60, a 50 mm calibre anti tank gun, same as that used as the main armament of later models of the German Panzer III. This gun is included as a highly detailed 3D resin print in kit that comes in 3 easy to assemble parts and also include a sprue of ammo boxes, both full and empty, to add even more realism and detail to your model!

This bunker body comes in three parts printed in FDM, for a great concrete look just brush it over with very diluted tile grout or a mix of PVA and baking soda! It also include a sprue of resin details.

This model is a very accurate scale reproduction, including the interior.

Overall size is 80 x 90mm and the height is 40mm.
Require assembly. Supplied unpainted.

Click here for shipping charges

---

Plain cast: EURO€ 9.50
Quantity:

---

On to Scenic Bases!

• On to bunkers!
• Back to the CAMA range front page
• Back to Home page