15mm WWII objectives, accessories and markers - compatible with Flames of War AVAILABLE NOW!



Code: 15A02CB

Front Line Command post + small base.
One 50mm wide by 65mm deep (2"x 21/2") + one 32mm wide by 25mm deep (11/4"x 1").
Perfect as a game objective marker this model is cast in tough polyurethane resin and in the same size of a large FoW base. It has plenty of beautifully sculpted surface detail to help you in painting, including damage from enemy fire which will add an authentic feel to your battleground! Comes complete with a small scenic base suitable for command units, snipers, observers, etc. selected at random from 10 different variations.
Supplied unpainted.


Click here for shipping charges

Plain cast: EURO€ 7.85
Quantity:








Master Model by C. Berni
Painted by C.Berni





Code: 15A03CB

Ammunition dump + small base.
One 50mm wide by 65mm deep (2"x 21/2") + one 32mm wide by 25mm deep (11/4"x 1").
Cast in tough polyurethane resin and designed specifically as a game objective marker this fantastic little model is the same size of a large Flames of War base to be fully compatible with the rules and has plenty surface detail to help you in painting. Comes complete with a small scenic base suitable for command units, snipers, observers, etc.
Supplied unpainted.


Click here for shipping charges

Plain cast: EURO€ 7.85
Quantity:







Master Model by C. Berni
Painted by C.Berni






Code: 15A12CB

Food stash + small base.
One 50mm wide by 65mm deep (2"x 21/2") + one 32mm wide by 25mm deep (11/4"x 1").
Perfect as a game objective marker this model is cast in a sigle piece tough polyurethane resin and in the same size of a large FoW base. It has everything your army needs to celebrate properly after victory, all with plenty of beautifully sculpted deeply carved details to help you in painting! Comes complete with a small scenic base suitable for command units, snipers, observers, etc. selected at random from over 10 different variations.
Supplied unpainted.


Plain cast: EURO€ 7.85
Quantity:
15mm Food stash (objective marker) + small base





15mm Food stash (objective marker) + small base
Master Model by C. Berni
Painted by C.Berni








Code: 15A14CB NEW!
Fuel dump + small base.
One 50mm wide by 65mm deep (2"x 21/2") + one 32mm wide by 25mm deep (11/4"x 1").
Tank fuel consumption was measured in gallons per mile rather than miles per gallon and it was of paramount importance to have enough fuel on hand to keep your armoured vehicles going, so temporary fuel dumps like this were set up close to the front line just before the battle. Perfect as a game objective marker this model is cast in tough polyurethane resin and in the same size of a large FoW base. It has plenty of beautifully sculpted surface detail to help you in painting. Comes complete with a small scenic base suitable for command units, snipers, observers, etc. selected at random from 10 different variations.
Supplied unpainted.


Plain cast: EURO€ 7.85
Quantity:







Master Model by C. Berni
Painted by C.Berni





Code: 15A18CB

Bombed Mercedes 170V + small base
One 50mm wide by 65mm deep (2"x 21/2") + one 32mm wide by 25mm deep (11/4"x 1").
Perfect as a game objective marker this model is cast in tough polyurethane resin and in the same size of a large FoW base. It has plenty of beautifully sculpted surface detail to help you in painting, including realistic battle damage to add an authentic feel to your battleground! Comes complete with a small scenic base suitable for command units, snipers, observers, etc. selected at random from 10 different variations.
Supplied unpainted.


Click here for shipping charges

Plain cast: EURO€ 7.85
Quantity:







Master Model by C. Berni
Painted by C.Berni




Code: 15A23CB

Fire control position + command base (Objective marker)
One 50mm wide by 65mm deep (2"x 21/2") + one 32mm wide by 25mm deep (11/4"x 1").
Perfect for any desert or jungle setting as a game objective marker this model is cast in tough polyurethane resin and in the same size of a large FoW base. The roof is removable and there is just enough space inside to fit a medium FoW base. It has plenty of beautifully sculpted surface detail to help you in painting even on the underside of the removable roof! Comes complete with a small scenic base suitable for command units, snipers, observers, etc. selected at random from 10 different variations.
Supplied unpainted.


Click here for shipping charges

Plain cast: EURO€ 7.85
Quantity:








Master Model by C. Berni
Painted by C.Berni





Code: 15A30CB

Downed BF109e + small base.
One 50mm wide by 65mm deep (2"x 21/2") + one 32mm wide by 25mm deep (11/4"x 1").
Perfect as a game objective marker this model is cast in our usual tough polyurethane resin and in the same size of a large FoW base. As you can see the model is basically a single piece like our other objectives, but also comes complete with an optional right side rear wing, which can be left out or pinned on as you prefer! It has plenty of beautifully sculpted, deep carved details to help you in painting, including an accurate reproduction of the actual Messerschmitt engine interior! Comes complete with a small scenic base suitable for command units, snipers, observers, etc. selected at random from 10 different variations.
Supplied unpainted.
Click here for shipping charges

Plain cast: EURO€ 7.85
Quantity:









Master Model by C. Berni
Painted by C.Berni





Code: 15A33CB

15mm Advanced Command post (urban) + small base.
One 50mm wide by 65mm deep (2"x 21/2") + one 32mm wide by 25mm deep (11/4"x 1").
Perfect as a game objective marker this model is cast in our usual tough polyurethane resin and in the same size of a large FoW base. As you can see the model is a single piece like our other objectives, no assembly required! It has plenty of beautifully sculpted, deep carved details to help you in painting!
Comes complete with a small scenic base suitable for command units, snipers, observers, etc. selected at random from over 20 different variations.
Supplied unpainted.

Click here for shipping charges

Plain cast: EURO€ 7.85
Quantity:
15mm Advanced Command post (urban) + small base. 15mm Advanced Command post (urban) + small base.





15mm Advanced Command post (urban) + small base.

15mm Advanced Command post (urban) + small base.
Master Model by C. Berni
Painted samples will be available soon!





Code: 15A43CB

15mm Objective: jerrycans stack + 8 separate jerrycans (rural).
One 50mm wide by 65mm deep (2"x 21/2") + one 32mm wide by 25mm deep (11/4"x 1").
Perfect as a game objective marker this model is based on the allies fuel dumps used in France from 1944 and it is cast in our usual tough polyurethane resin in the same size of a large FoW base. As you can see the model is a single piece like most our other objectives, no assembly required. It has plenty of beautifully sculpted, deep carved details to help you in painting and comes complete with a small stick with 8 individual jerrycans to personalize each model!
Supplied unpainted.
Click here for shipping charges

Plain cast: EURO€ 7.85
Quantity:







Master Model by C. Berni
Painted by C.Berni

15mm Stack of jerrycans (objective marker) + small base




Code: 15A42CB

15mm Vf6a Spotter Bunker (German)

This bunker, called a "Beobachtungsstand splittersicher" was designed as a protected observation post and has a wide opening which allows an excelllent field of view all around. It could be used as a spotter for artillery fire and makes a fantastic objective for a scenario game! The VF (Verstärkt Feldmäßig) was a series of light bunkers with walls between one and two meters thick and no airtight seal or ventilation. This model is a very accurate scale reproduction and has plenty of beautifully sculpted surface detail to help you in painting, including damage from enemy fire.
Like all other models in this range it is made of tough POLYURETHANE; the roof is a separate piece which can be left loose to be removed and allow access to the interior, or glued in place. Overall size is 75x55mm and the height is 38mm. There is not enough space inside to fit a Flames of War base.
Supplied unpainted.

Click here for shipping charges
Plain cast: EURO€ 7.85
Quantity:







Master Model by C. Berni
Painted by C.Berni




Code: 15A04CB

15mm Objective Vf58c Tobruk bunker emplacement (with optional tank turrets FT17 + R35 APX)
This code includes a tobruk bunkers based on a Fow-size large base 50mm wide by 65mm deep (2"x 21/2") + one 32mm wide by 25mm deep (11/4"x 1"). Next to the entrance there is a covered space exactly sized for a small team base. Perfect as an objective or to be added to a larger terrain piece, board or table. Also included are two early war French tank turrets (a Renault FT17 with the 8 mm Hotchkiss machine gun and a R35 APX with the Puteaux SA 18 - 37mm gun) that were commonly used by the germans on such static fortifications, especially along the Atlantic Wall.
The tobruk bunker can be fitted with any of the turrets or with a standard infantry MG (not provided).
Supplied unpainted.


Click here for shipping charges

Plain cast: EURO€ 7.85
Quantity:
15mm emplaced Vf58c Tobruk bunker (with optional tank turrets FT17 + R35 APX) 15mm emplaced Vf58c Tobruk bunker (with optional tank turrets FT17 + R35 APX)
On to Scenic Bases!





15mm emplaced Vf58c Tobruk bunker (with optional tank turrets FT17 + R35 APX)
15mm emplaced Vf58c Tobruk bunker (with optional tank turrets FT17 + R35 APX)
Master Model by C. Berni
Painted by C.Berni





Code: 15A44CB

Vf67 Tobruk für Kampfwagenturm (with pzkpfw II & pzkpfw 38T turrets).
The Vf67 was a larger version of the Vf58 tobruk bunker (still fits on a Fow-size medium base anyway, just!) that was used for bigger tank turrets. There are two different ones to choose from included in this kit: the early war panzer II and one from the ČKD LT vz. 38, a Chzeck light tank adopted by Nazi Germany as Pz. 38(t) following annexation. Production ended in 1942, when its main armament was deemed inadequate. The chassis of the Pz. 38(t) continued to be produced for the Marder III until 1944, while the old turrets were commonly re-used on static fortifications.
This bunker body comes in two parts with full interior plus a separate armored door, and can be fitted with any of the two turrets provided.
Supplied unpainted.


Click here for shipping charges

Plain cast: EURO€ 7.85
Quantity:
Vf67 Tobruk für Kampfwagenturm (with pzkpfw II & pzkpfw 38T turrets) Vf58c Tobruk bunkers x 3 (with optional tank turrets FT17 + R35 APX)
On to Scenic Bases!





Vf67 Tobruk für Kampfwagenturm (with pzkpfw II & pzkpfw 38T turrets)
Vf67 Tobruk für Kampfwagenturm (with pzkpfw II & pzkpfw 38T turrets)
Master Model by C. Berni
Painted by C.Berni





Code: 15A19CB

15mm M2 modular pontoon bridge (US)

The M2 Treadway Bridge was a heavy pontoon bridge that had up to a 40-ton capacity. It could be deployed in almost any length and it was used over major rivers like the Rhine and Moselle. The bridge was assembled from several purpose-built components including the U.S. M2 pneumatic pontoon, M2 treadway bridge sections and access ramps. It would take five and a half hours to an experienced crew to place a 362 foot section of M2 bridge in daylight and two hours more at night. Two pontoons fastened together could (and were!) used as ferries. This model is a very accurate scale reproduction and has plenty of beautifully sculpted surface detail to help you in painting!
Like all other models in this range it is made of tough POLYURETHANE; it require no assembly but can be obviously glued in place if you like. Overall bridge size is approximately 180x95mm and the height is 18mm. You can confortably fit a standard infantry Flames of War base on a single pontoon.
Supplied unpainted.

Click here for shipping charges
Plain cast: EURO€ 14.90
Quantity:








Master Model by C. Berni
Painted by C.Berni




Code: 15A20CB

15mm M2 single pontoon module (US)

This individual pontoon is mainly designed as an expansion for our M2 Treadway Bridge. Two pontoons fastened together could (and were!) used as ferries. This model is a very accurate scale reproduction and has plenty of beautifully sculpted surface detail to help you in painting! Like all other models in this range it is made of tough POLYURETHANE; it require no assembly but can be obviously glued in place if you like. Overall pontoon size is approximately 41x95mm and the height is 18mm. You can confortably fit a standard infantry Flames of War base on a single pontoon.
Supplied unpainted.

Click here for shipping charges
Plain cast: EURO€ 7.85
Quantity:






Master Model by C. Berni
Painted by C.Berni




Code: 15BRA

A modular barge bridge set that can be used from medieval time up to WWII! Being made of modular components means you can tailor the length to your needs, and combine it with other elements of our ranges. This model is specifically designed as a military wooden bridge for 15mm games, and it is therefore the exact width to comfortably hold a 40mm wide figures base, it also works perfectly well with smaller scales as a larger construction. The complete base model include three barges and the overall size is180x80mm, 32mm tall. The walkway is 45mm wide and at the top of the ramp is 15mm high. It can be used with less barge modules to have a shorter size if needed, or you can purchase additional modules to extend it!
5 parts. Supplied unpainted.





15BRA complete modular barge bridge: EURO€ 19.50
15BRA
Quantity:



 15mm modular rural barge bridge!

15BRB single barge module: EURO€ 7.50


15BRB
Quantity:



Code: 15A10CB

3 different medium + 1 small 'dug-in' markers (rural).
Medium markers are 80mm wide by 30mm deep (31/8"x 13/16"). The space inside is large enough to accomodate a Large Base (face on) or a Medium Base (wide).
Small markers are 58mm wide by 25mm deep (25/16"x1"). The space inside is large enough to fit a Small Base or a Medium one (deep).
Cast in tough polyurethane resin and designed to fit around the standard size of Flames of War bases, these are the perfect solution to mark out your protected units. As you can see they are highly detailed with tree stumps, pieces of broken fences, sandbags and all sort of things you can expect to find piled up into hastily constructed field fortifications.
Supplied unpainted. All sizes are approximate.


Click here for shipping charges

Plain cast: EURO€ 7.85
Quantity:

status:
item production has been discontinued, it is currently being redesigned.








Code: 15A11CB


2 different large + 1 small 'dug-in' markers (rural).
Large markers are 92mm wide by 38mm deep (35/8"x 11/2"). The space inside is large enough to accomodate a Large Base (wide) or two medium ones.
Small markers are 58mm wide by 25mm deep (25/16"x1"). The space inside is large enough to fit a Small Base or a Medium one (deep).
Cast in tough polyurethane resin and designed to fit around the standard size of Flames of War bases, these are the perfect solution to mark out your protected units. As you can see they are highly detailed with tree stumps, pieces of broken fences, sandbags and all sort of things you can expect to find piled up into hastily constructed field fortifications.
There are several different designs of this item, pack contains a random selection! Supplied unpainted. All sizes are approximate.


Click here for shipping charges

Plain cast: EURO€ 7.85
Quantity:

status:
item production has been discontinued, it is only available until stock lasts.









Code: 15A22CB
3 different medium + 1 small 'dug-in' markers (desert).
Medium markers are 80mm wide by 30mm deep (31/8"x 13/16"). The space inside is large enough to accomodate a Large Base (face on) or a Medium Base (wide).
Small markers are 58mm wide by 25mm deep (25/16"x1"). The space inside is large enough to fit a Small Base or a Medium one (deep).
Cast in tough polyurethane resin and designed to fit around the standard size of Flames of War bases, these are the perfect solution to mark out your protected units. As you can see they are highly detailed with discarded fuel drums and wooden boxes filled with stones and dirt, rocks, sandbags and all sort of things you can expect to find piled up into hastily constructed field fortifications in a desert environment.
There are several different designs of this item, pack contains a random selection! Supplied unpainted. All sizes are approximate.


Click here for shipping charges

Plain cast: EURO€ 7.85
Quantity:







Master Model by C. Berni
Painted by C.Berni



Code: 15A31CB
3 different medium + 1 small 'dug-in' markers (urban).
Medium markers are 80mm wide by 30mm deep (31/8"x 13/16"). The space inside is large enough to accomodate a Large Base (face on) or a Medium Base (wide).
Small markers are 58mm wide by 25mm deep (25/16"x1"). The space inside is large enough to fit a Small Base or a Medium one (deep).
Cast in tough polyurethane resin and designed to fit around the standard size of Flames of War bases, these are the perfect solution to mark out your protected units. As you can see they are highly detailed with tree stumps, pieces of broken fences, sandbags and all sort of things you can expect to find piled up into hastily constructed field fortifications.
There are several different designs of this item, pack contains a random selection! Supplied unpainted. All sizes are approximate.


Click here for shipping charges

Plain cast: EURO€ 7.85
Quantity:







Master Model by C. Berni
Painted by C.Berni



Code: 15A32CB
2 different large + 1 small 'dug-in' markers (urban).
Large markers are 92mm wide by 38mm deep (35/8"x 11/2"). The space inside is large enough to accomodate a Large Base (wide) or two medium ones.
Small markers are 58mm wide by 25mm deep (25/16"x1"). The space inside is large enough to fit a Small Base or a Medium one (deep).
Cast in tough polyurethane resin and designed to fit around the standard size of Flames of War bases, these are the perfect solution to mark out your protected units. As you can see they are highly detailed with tree stumps, pieces of broken fences, sandbags and all sort of things you can expect to find piled up into hastily constructed field fortifications.
There are several different designs of this item, pack contains a random selection! Supplied unpainted. All sizes are approximate.


Click here for shipping charges

Plain cast: EURO€ 7.85
Quantity:







Master Model by C. Berni
Painted by C.Berni


Code: 15A46CB
4 different assorted small 'dug-in' markers.
These Small markers are 58mm wide by 25mm deep (25/16"x1"). The space inside is large enough to fit a Small Base (side on) or a Medium one (front on).
Cast in tough polyurethane resin and designed to fit around the standard size of Flames of War bases, these are the perfect solution to mark out your protected units. As you can see they are highly detailed with tree logs and stumps, buildings rubble, pieces of broken items, sandbags and all sort of other things you can expect to find piled up into hastily constructed field fortifications.
There are several different designs of this item, pack contains a random selection of four! Supplied unpainted. All sizes are approximate.


Click here for shipping charges

Plain cast: EURO€ 7.85
Quantity:




Master Model by C. Berni
Painted by C.Berni


Code: 15A21CB
Battlefield Accessories: stacked supplies
This is something different: a pack chocked full of beautifully detailed accessories you can use to customize and add interest to your units and terrain!
Cast in tough polyurethane resin and designed for 15mm figures, these are the perfect solution to make your own objective markers, truck loads, hastily built barricades, and a hundred other different uses! The pack contains nine different clumps of stacked goods piled on wooden boards, including roll-ups, wooden boxes, jerrycans and drums, picked at random out of the ten design shown. They are just waiting to go on your bases!
Pack contents can vary. Supplied unpainted. All sizes are approximate.


Click here for shipping charges

Plain cast: EURO€ 7.85
Quantity:







For more variety and for stowage you can also use
Code LGS3 and >Code LGS4 WWII supplies!